– The communication center for intelligently controlled charging
Features
OCPP COMMUNICATION TO A CENTRAL SYSTEM
– The OCPP communication standard makes controlled charging, monitoring and billing possible
LOCAL LOAD MANAGEMENT
– The x-series can control the charging processes of up to 15 KeContact P30 c-series depending on the energy available
FOR INTEGRATED ELECTROMOBILITY SOLUTIONS
– The “x-series” makes local load management possible: Because of simultaneous charging of multiple electric vehicles, the required energy demand can exceed the available charging capacity
– Load management makes it possible to smooth out the load curve of the connected vehicle by means of time relocation, prioritizing or distribution and prevent expensive peak loads
– Capacities are therefore used in the best possible way, costs reduced in the long-term and resource consumption optimized
– The goal of load management system is to get rid of power peaks and therefore even out the trend of power consumption
– External meter data can easily be read out via Modbus TCP protocol so that the charging processes can, for example, be controlled depending on the house power grid
Specifications
OPERATION
– Maximum charging current per phase: 32A
– Maximum charging power: 22kW
– LED strip for status information: Yes
– DC-leakage detection: Yes
– Power monitoring: Yes
– Enable input / Switch output : Yes
– Display (freely programmable): Yes
– Web interface for configuration settings
COMMUNICATION INTERFACE
– USB interface
– Ethernet interface (RJ45) – Debug
– Ethernet interface for permanent installation (LSA+)
– Charge control by external systems (Smart Home & Energy Management Systems) via UDP and Modbus TCP (passive)
– Dynamic home connection monitoring with an external power meter via Modbus TCP (active)
– OCPP communication as master or standalone
– WLAN communication for the wireless integration of wall boxes in an existing network
LOAD MANAGEMENT
– Master (OCPP, load management)
– Local static or dynamic load management as master
TECHNICAL FEATURES
– DC leakage detection
– Metering
– Enable input
– Switch output
